Hello everyone! We are back today with another tutorial in the Samantha Hacks series and we are gonna show you how to add a gathered skirt and create a totally different look.
Changing the original full skirt of the Samantha dress to a gathered skirt has been a request by many of you. Full skirts sometimes tend to highlight the hip area as the fabric skims down and we know that this feature of the pattern has prevented some of you from making it. But fear no more! Drafting a gathered skirt is soooo easy and it can make the Samantha look completely different. Here’s how you’ll do it!
You will need:
-a large piece of paper to draft the new skirt
-a measuring tape, a ruler, a pair of scissors
-your fabric and usual sewing supplies (thread, pins etc)
We will start by constructing the bodice. The Samantha dress waistline is designed to hit you at your natural waist, so you may need to lengthen or shorten the bodice to adjust it accordingly. We have written a tutorial about this adjustment HERE. Once you’ve done that, cut out the bodice front and back pieces, as well as the neckline binding piece. Sew the bodice together following the instructions in the pattern booklet.
When you finish with the bodice, try it on and overlap the front pieces. Pin and carefully take it off. At this stage, we recommend sewing a basting stitch line to keep the pieces from moving -but try to stay inside the 1 cm (3/8″) seam allowance.
Now, measure the front waistline and write this number down. Then, measure from your natural waist to the point where you want the skirt to hit you and write down this number as well. We will use these measurements to draft the skirt pieces.
For the skirt pieces, you are esentially going to draft a rectangle. You can either draw it on a piece of paper or measure it directly on the fabric. However, having the pattern piece ready can come in handy if you want to make the same thing again in the future.
For the rectangle’s width, you are going to take the waistline’s measurement and multiply it by 2. For the rectangle’s length, you will need the length measurement +1cm seam allowance for the waistline +2 cm hem allowance. Our rectangle ended up being 76 cm wide and 57 cm long.
As soon as your pattern piece is ready, go ahead and cut out two identical rectangles. Then, pin the side seams, right sides together and stitch.
The next step is to gather the skirt. Sew two lines of gathering stitches at the waistline, being careful to stay inside the seam allowance. Do NOT backstitch, instead leave long tails of your threads to gather the fabric. It is also helpful to stitch two lines on the front piece and two lines on the back piece to manipulate the fabric more easily. Using the thread tails, start gathering the fabric at the waistline until the width of the skirt matches the width of the bodice’s waistline.
Insert the bodice to the skirt, right sides together and matching at the waistline. Match the side seams as well and ry to distribute the gathers as evenly as possible. Pin and stitch in place.
Hem the skirt and sleeves, give everything a good press and wear your new Samantha dress with pride 🙂
We hope you enjoyed this tutorial! If you try this hack, don’t forget to post it on social media and tag us, so we can admire your beautiful dress!
And if you are looking for more hacks for the Samantha dress pattern, check out the other tutorials in the series by clicking on the images below. Happy sewing!
Note: To create our step by step photos for this tutorial, we used a beautiful jersey fabric, gifted to us by Lamazi Fabrics.